The following Specialist Consultancy Services can be provided by Applus RTD. These are all activities which our current personnel have experience of carrying out on behalf of our various clients:
Corrosion/Materials.
Corrosion Control (Materials selection, Inhibition and treatment, Coatings, Cathodic Protection). Corrosion Monitoring. Corrosion risk assessment. Materials specification. Welding engineering. Chemical resistance and mechanical testing. On-site Metallurgical Testing.
Inspection.
Inspection schemes. Risk-based inspection. Non-intrusive inspection planning. Inspection/NDT method studies.
Pressure Systems.
Defect Assessment.
Fitness for Purpose Studies.
Management.
Corrosion Management system development. Inspection Management system development and improvement.
Quality system review and auditing.
Project Management of inspection works.
Failure Investigation Services.
Corrosion/Materials Failure Investigation and Studies.
NDT Technique Consultancy.
Level 3 capabilities for the development of the use of standard techniques and solutions for specific projects.
Specialist Techniques.
Development and advice on the deployment of specialist NDT methods. (EG, Time of Flight Diffraction, ACFM, Mapscan, IRIS, Helium Leak Detection, Long Range Ultrasonic, Pulsed Eddy Current, Low Frequency Eddy Current, etc).
Incident Investigation.
Review of incidents, especially concerning system and technical failures in the areas identified above.